Weird AV Settings
That was the title of a post over at the iRV2 Newmar Forum. And it reads, in part:
I finally got to sit down tonight and figure out what in the world was going on with the AV setup in 2015 DSDP. I’m fairly AV savvy and was mostly stymied by not having (a) time, (b) extra cables from my big pile back home, and (c) the ability to take apart that insane amount of velcro holding all the boxes in the cabinet above the driver.
This is a picture of our AV Cabinet in the Castaway:
Since that picture was taken, I have added two 120mm fans to pull heat out of the cabinet, one Harmony Hub universal remote base station, one IR blaster, and a Bell HD satellite receiver. I also need to add an Apple TV. But right now there is too much clutter and not enough space.
Installed in the coach was a cheap Sony STR-DH550 AV Receiver, a Sony BDP-1500 Blu-Ray player, a Winegard Trav’ler base station, two splitters and lots of cables.
Nothing about this setup makes much sense to me. What was bad? Well, a cheap subwoofer hidden inside the kitchen cabinet. The front grill literally a few millimetres from the cabinet sidewall. Incorrect settings for the surround sound receiver — all speakers were set to large and, with 3-inch drivers, they are certainly not large. No ability to see the receiver settings on the TV panels because of the way in which the cabling was interconnected. Lots of heat and no space for adding or changing components. Way, way too many remotes. The first thing I purchased for the AV cabinet was a Logitech Universal Remote.
I have to literally empty the cabinet and get myself a bit more room in there. The receiver barely fits in the space which will limit my choices in terms of a replacement unit. There is no shelving to create some distance between the components. And the default routing of the HDMI cables limits the functionality of the various components. One example is dropping the Audio Return Channel functionality with HDMI. The living room TV returns audio through a digital cable, not through HDMI. Unnecessary cable run. Another example is not being able to program the receiver using the receiver’s GUI on the TV screen. The only way to program the receiver is by using the receiver’s small LCD panel.
The only physical change that I have made to the setup thus far is to connect an external subwoofer. It is placed behind one of the recliners. I also changed the speaker setting to small and set up the crossover to allow the subwoofer to shoulder most of the work on the lower end of the frequency spectrum. It sounds so much better now.
I have a compact subwoofer on order as the one I am using is really too large for the space. I will be installing a Cambridge Audio Minx X201 powered subwoofer. It is very compact at roughly 8.5 inches wide x 8.5 inches high x 10 inches deep. I will need to make my first hole in my coach to route the subwoofer cable through the back of the kitchen cabinet to the new subwoofer. I suppose a coach really isn’t your own until you make that first opening. This small subwoofer should be fine for the size of the listening area.
Obviously, audio is not a strong suit of the Newmar Dutch Star. The components are functional as entry level components go but I will be replacing all of the audio components: receiver, blu-ray player, speakers. The listening space will sound significantly better with a better set of speakers.
This is a time consuming project though and one that I won’t start for a while. The external subwoofer along with a few setting changes make the system bearable in the short term.
Leave a ReplyWant to join the discussion?
Feel free to contribute!